Need Help?
(636) 386-8022 (636) 386-8022
0

“M-TECS” Magnetic clamping systems

Magnetics allow hot mold changes in just a few minutes.

Magnetic clamping plates for different sectors of industry, including thermoplastics, elastomers, duroplastics, polyurethane, pressure die casting, metal forming and milling applications.

The magnetic clamping systems or clamping plates have been especially designed for injection molding machines, rubber presses, die casting machines, mold carriers, presses for metal forming and milling machines.

The product range “M-TECS” stands for magnetic clamping technology, that means clamping technology of the highest level and offers the following key advantages for the user:

• standardization of molds are not required
• height of clamping edge and mold shape are not of importance
• shorter downtimes, lower setup costs
• increased productivity
• clamping in barely accessible positions without any problems
• no reduced clamping surfaces
• process monitoring and thus absolute safety
• clamping force on the complete surface of the mold
• clamping with no deformation of the mold base platen
• reduced maintenance costs

 
Scroll through the chart below for the product matching your industry and application.

Series Data Sheet Technical Data

M-TECS_240-G
M-TECS_240-G

M-TECS 240-G

for the rubber and Duroplast industry,
usable up to 240 °C

PDF Download

max. working temperature: 240°C
specific magnetic force: 18 kg/cm² (directly at the pole)
effective magnetic force: max 5-12 kg/cm²
magnetic penetration depth: 15-20mm
plate thickness: 55mm, without heating
plate thickness: 75mm, with heating
mounting: as per customer’s request
interface: customer-specific or as per Euromap 70.0 / 70.1
suitable for horizontal and vertical machines
available with and without integrated heating,
insulation plates behind the heating magnetic plates

M-TECS_130-K
M-TECS_130-K

M-TECS 130-K

for the plastics industry,
usable up to 130°C

PDF Download

max. working temperature: 130°C
specific magnetic force: 18 kg/cm² (directly at the pole)
effective magnetic force: max 5-12 kg/cm²
magnetic penetration depth: 15-20mm
plate thickness: 47mm
mounting: as per EUROMAP grid
interface: as per EUROMAP 70.0 or 70.1 .
mounting and interface also possible upon customer’s request
option: with insulation plates behind the magnetic plates

M-TECS_240-D
M-TECS_240-D

M-TECS 240-D

for die casting machines,
usable up to 240 °C

PDF Download

max. working temperature: 240°C
specific magnetic force: 18 kg/cm² (directly at the pole)
effective magnetic force: max 5-12 kg/cm²
magnetic penetration depth: 15-20mm
plate thickness: 55mm
mounting: as per customer’s request
interface: customer-specific or as per Euromap 70.0 / 70.1

M-TECS_80-B
M-TECS_80-B

M-TECS 80-B

for sheet metal forming
usable up to 80°C

PDF Download

max. working temperature: 80°C
pole 50 mm: 350 daN / pole
pole 70 mm: 750 daN / pole
plate thickness: 55mm, pole 50x50mm
plate thickness: 67mm, pole 70x70mm
magnetic penetration depth: 15-20mm
mounting: as per customer’s request
interface: as per customer’s request

M-TECS_80-F
M-TECS_80-F

M-TECS 80-F

for mold carrier systems,
usable up to 80°C

PDF Download

max. working temperature: 80°C
specific magnetic force: 18 kg/cm² (directly at the pole)
effective magnetic force: max 5-12 kg/cm²
magnetic penetration depth: 15-20mm
plate thickness: 47mm
mounting: as per customer’s request
interface: as per EUROMAP 70.0 or 70.1 .